Ключевые слова: HTS, REBCO, strands, twisting, fabrication, comparison, quasi-isotropic strand, stacked blocks, tapes, measurement setup, critical current, current-voltage characteristics, mechanical properties, strain effects, distribution, twist-pitch, efficiency, experimental results, numerical analysis
Mitchell N., Bi Y., Bauer P., Devred A., Song Y., Sahu A.K., Lu K., Rodriguez-Mateos F., Dolgetta N., Gung C.Y., Ilin I.
Ключевые слова: feeder, ITER, helium supercritical, cryogenic systems, design, design parameters
Mitchell N., Bauer P., Ilyin Y., Chen Y., Zhou T., Devred A., Song Y., Sahu A.K., Lu K., Rodriguez-Mateos F., Knaster J., Dolgetta N., Nannini M., Gung C.Y., Lorriere P.
Ключевые слова: feeder, ITER, current leads, HTS, bus bar conductor, Bi2223, installation, supporting structure, quench detection, cryogenic systems
Mitchell N., Bauer P., Devred A., Clayton N., Sahu A.K., Dolgetta N., Gung C.Y., Prasad K., Mahadevappa V.
Ключевые слова: feeder, ITER, design, helium supercritical, vacuum structure, thermal performance, heat loads, modeling
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Gung C., Cheng Y., Ding K., Lu K., Shen G., Sahu A., Jong C., Dolgetta N., Ilin Y.
Ключевые слова: feeder, ITER, design, fabrication, termination, vacuum structure, cryostat
Ключевые слова: ITER, magnetic systems, hydraulic performances, cooling technology, LTS, cable-in-conduit conductor, numerical analysis
Sahu A.K., Bauer P., Bi Y., Chen Y., Cheng Y., Devred A., Ding K., Huang X., Liu S., Lu K., Mitchell N., Peng Y., Shen G., Song Y., Wang Z., Zhou T.
Ключевые слова: ITER, magnets, coils toroidal, LTS, NbTi, HTS, current leads, design, design parameters, feeder
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Cheng Y., Ding K., Lu K., Shen G., Rodriguez-Mateos F., Sahu A.
Ключевые слова: ITER, magnets, design parameters, cryogenic systems, feeder
Bauer P., Bi Y., Cheng A., Cheng Y., Devred A., Ding K., Huang X., Liu C., Lin X., Mitchell N., Sahu A., Shen G., Song Y., Wang Z., Zhang H., Yu J., Zhou T.
Ключевые слова: HTS, current leads, ITER, Bi2223, tapes, test results, design parameters, current sharing, critical caracteristics, critical current, magnetic field dependence
Mitchell N., Libeyre P., Bauer P., Bessette D., Sahu A., Gallix R., Gribov Y., Foussat A., Jong C.T.
Ключевые слова: ITER, correction coils, design parameters, cable-in-conduit conductor, NbTi, supporting structure, termination, LTS
Xu Y., Murakami M., Hirabayashi I., Sakai N., Hu A., Xu C., Izumi M., Sugimoto H., Kimura Y., Miki M., Morita E., Ichihara M.
Ключевые слова: HTS, REBCO, nanodoping, bulk, Jc/B curves, pinning force, irreversibility fields, experimental results, critical caracteristics, magnetic properties
Hirabayashi I., Sakai N., Hu A., Izumi M., Xu C.(cxu@e.kaiyodai.ac.jp)
Ключевые слова: HTS, REBCO, bulk, doping effect, fabrication, trapped field distribution, Jc/B curves, pinning force, critical caracteristics, magnetic properties
Ключевые слова: HTS, REBCO, bulk, fabrication, microstructure, nanodoping, critical current density, critical caracteristics
Ключевые слова: HTS, REBCO, nanodoping, fabrication, bulk, pinning force
Ключевые слова: HTS, REBCO, nanodoping, bulk, microstructure, Jc/B curves, pinning force, fabrication, experimental results, critical caracteristics
Hirabayashi I., Sakai N., Hu A., Izumi M., Xu C.(cxu@e.kaiyodai.ac.jp)
Ключевые слова: REBCO, HTS, bulk, doping effect, fabrication, Jc/B curves, critical caracteristics
Ключевые слова: HTS, REBCO, bulk, fabrication, Jc/B curves, pinning centers, pinning force, magnetic flux distribution, experimental results, single-domain, critical caracteristics
Hirabayashi I., Sakai N., Hu A., Izumi M., Xu C.(cxu@e.kaiyodai.ac.jp)
Ключевые слова: HTS, REBCO, bulk, fabrication, magnetization, magnetic properties
Ключевые слова: HTS, REBCO, bulk, Jc/B curves, peak effect, anisotropy, irreversibility fields, experimental results, critical caracteristics, magnetic properties
Ключевые слова: HTS, REBCO, bulk, pinning centers, fabrication, microstructure, Jc/B curves, pinning force, experimental results, critical caracteristics
Murakami M., Inoue K., Hirabayashi I., Hu A., Nariki S., Sakai N.(nsakai@istec.or.jp)
Ключевые слова: HTS, REBCO, bulk, levitation performance, fabrication
Hirabayashi I., Sakai N., Hu A., Izumi M., Xu C.(cxu@e.kaiyodai.ac.jp)
Ключевые слова: HTS, REBCO, bulk, doping effect, pinning centers, Jc/B curves, microstructure, fabrication, experimental results, critical caracteristics
Murakami M., Hirabayashi I., Sakai N., Zhou H., Hu A.(amhu@istec.or.jp)
Ключевые слова: REBCO, bulk, fabrication, precursors, pinning centers, Jc/B curves, peak effect, microstructure, experimental results, doping effect, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.